Read a solar quote: cash price, financed price and the sales assumptions

Separate a solar quote into the system price, the financing terms and the savings assumptions, so proposals can be compared on the same footing.

A kitchen table with a closed folder and a mug, solar roof through window.

A solar proposal tends to blend three different things into one monthly figure: what the system costs, how it is paid for and what it is assumed to save. Pulled apart, each can be checked separately. Blended, they are hard to compare with another quote or with your current bill.

This guide shows how to split a quote into those parts. It is general information, not a recommendation to buy, and it does not estimate savings for any home. For the earlier question of whether your home is ready for solar, see the solar readiness guide.

Step 1: Get the quote in writing, with the same scope from each company

The FTC advises getting detailed written bids from several companies, covering system size, expected output, the full installation cost including permits, any energy guarantees and warranties (FTC, Solar power for your home, checked November 18, 2026). The FTC also advises being wary of a company that pushes a quick decision, or asks you to pay in cash.

For a fair comparison, give each company the same inputs, as described in giving every contractor the same brief. If one quote includes a battery, a roof repair or a panel upgrade and another does not, they are not the same product.

Step 2: Find the cash price and what it includes

Ask for the total price if you paid outright, and make sure the quote says what it covers: equipment, installation, permits, interconnection with the utility and any warranty. The DOE’s homeowner guide says that, in general, a purchased solar system can be installed at a lower total cost than one financed through a loan, lease or PPA (DOE, Homeowner’s guide to going solar, checked November 18, 2026). That statement is about the structure of the options, not your quote.

Record the size of the system in kilowatts and the estimated yearly output in kilowatt-hours. Dividing the cash price by the system size gives a price per kilowatt you can compare across quotes, provided each quote covers the same scope.

A calculator and pen on a desk.

Step 3: Identify how it is financed

The DOE guide describes buying outright and three financed routes. With a loan you own the system, and DOE says monthly loan payments are in most cases smaller than a typical energy bill. A lease means fixed monthly payments for the use of a system you do not own. A power purchase agreement (PPA) means buying the system’s electricity at an agreed price per kilowatt-hour.

The FTC adds detail on the contract terms to find: the contract length, the monthly lease payment or per-kWh PPA rate and any scheduled increases, extra fees and early-termination charges, who handles maintenance and roof repairs, who receives the tax credits and incentives, the options at the end of the contract and whether you can transfer the contract if you sell your home. It also notes that some lease contracts last 20 years and that monthly lease payments can increase over time.

The FTC separately warns about PACE financing, under which a property tax lien is placed on the home, and says that lien can take priority over your mortgage. Ask how it would affect refinancing or selling.

Step 4: Calculate the total of the payments

Ignore the headline monthly payment until you have added up the whole commitment. An invented example: a quote lists a $24,000 cash price. The financed version is $140 a month for 240 months. The total of the payments is $140 x 240 = $33,600, which is $9,600 more than the cash price. That difference is the cost of financing in this example, and it is only meaningful alongside the loan’s rate, any fees and the term. The figures are invented and do not describe any real offer.

For a lease or a PPA, work out the total over the term with the scheduled increases. If a $120 monthly lease rises 3 percent a year, year two is $120 x 1.03 = $123.60 a month. Ask for the full payment schedule in writing rather than a first-year figure.

Step 5: Separate the savings assumptions

The savings line is where quotes depend most on assumptions. The FTC notes that a sales presentation may show projected costs with and without the system, and that future utility rates are hard to predict. Ask the seller to list each assumption: the utility rate used now, the annual rate increase assumed, how electricity exported to the grid is valued, how much of your usage the system is expected to cover, and the yearly drop in panel output.

Then check them against documents. Your own bills show your current rate. Your utility’s tariff documents show how exports are credited, and the DOE guide points to confirming net metering terms in your utility’s service area. If the proposal assumes a rate or a crediting rule you cannot find in any utility document, ask where it comes from.

Continuing the invented example, if the quote claims $1,800 a year in savings, then $24,000 divided by $1,800 is about 13.3 years to recover a cash price. If the financed payment of $140 a month ($1,680 a year) is set against the same $1,800, the claimed net is $120 a year. Both results move with every assumption above, so test them with different values.

Step 6: Count incentives only if they apply to you

Ask the quote to show every incentive as its own line, with the program, who is eligible and who claims it. On the federal Residential Clean Energy Credit, the IRS says the credit is not available for any property placed in service after December 31, 2025 (IRS, Residential clean energy credit, checked November 18, 2026). A system installed in 2026 or later is therefore outside that credit, so if a quote still counts a federal credit, ask exactly which credit it means and where the rule allows it; do not count it in your totals until the seller shows the source. State, local and utility incentives are separate and vary; the DOE guide points to the DSIRE database, which lists incentives by ZIP code.

The DOE and FTC both note that with a lease or PPA you generally do not receive tax benefits that go to the system’s owner.

Step 7: Compare and ask before signing

Put the quotes in one table: system size, cash price, financing type, total of payments, assumptions and incentives. Where the answers are missing, ask for them in writing. The DOE guide suggests reviewing the Treasury, CFPB and FTC consumer guides before signing a lease, PPA or subscription.

If any step leaves you unsure, ask the seller to explain it in writing. For how to fund a project of this size and compare borrowing costs, Money Master covers the money side at moneymaster.fyi. Electrical, roofing and structural questions belong with licensed professionals.

Common questions

Is the cash price the best number to compare? It is the cleanest, if each quote covers the same scope, because it excludes financing.

Does a lower monthly payment mean a better deal? Not by itself. Compare the total of the payments and the term.

Who gets the tax credit on a lease or PPA? The DOE and FTC guides say tax benefits go to the system’s owner, not the household. Check the IRS page above for whether any federal credit applies at all.

Where do I report a problem with a seller? The FTC directs reports to ReportFraud.ftc.gov or your state attorney general.

Sources checked November 18, 2026: FTC, Solar power for your home; DOE, Homeowner’s guide to going solar; IRS, Residential clean energy credit. The DOE page’s tax-credit details may be dated; check current incentive rules on the IRS page. This is general information, not tax advice; whether any incentive applies to you depends on your situation, and a tax professional can confirm it.